Shiv Shakti Chemicals

• Fast easy to read results with large digital LCD readout
• Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)
• Lightweight and portable
• Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
• Simple push button, automatic two-point calibration for increased accuracy
• Food grade electrode with a rugged, easy-to-clean, PVDF body, a conical tip for use with semi solids with a screw on cap to ensure proper storage
• Rugged stainless temperature probe
• 3 feet probe cables for extra flexibility when testing
• Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use!

The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage.

• pH Range: 0.00 to 14.00 pH
• Temp Range: 23 to 104°F
• pH Accuracy ±0.02 pH
• pH Resolution: 0.01 pH
• Temp Resolution 0.1°C
• Temp Accuracy (@25°C): ±0.5°C
• Temperature Compensation: Automatic, 0 to 70°C
• Calibration: Automatic, 1 or 2 points
• pH Electrode: MA920B/1 (included)
• Temperature: Probe MA831R (included)
• Environment: 0 to 50°C / 32 to 122°F; max RH 95%
• Battery Type: 1 x 9V (included)
• Battery Life: Approx. 300 hours of continuous use
• Auto-off: After 8 minutes of non-use
• Approximate dimensions: 5.7 x 3.1 x 1.6 inches

• DESIGN FEATURES
  • Fast easy to read results with large digital LCD readout.
  • Accurate to ±0.02 pH with a 0.00-14.00 pH range.
  • Lightweight and portable.
  • Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
  • Simple manual two-point calibration for increased accuracy.
  • Gel-filled, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage (SE220 probe included).
  • 3 feet probe cables for extra flexibility when testing.
  • Auto shut off and low power demand for approx. 300 hours of continuous use. (battery included)
  USE AND CARE 

  pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

  SENSING BULB

  The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

  REFERENCE JUNCTION

  The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function.

  You can extend the life of your pH electrode in the following ways.

  CLEANING AND STORAGE

  All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use!

  STORAGE

  The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

  Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.

  The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

  CLEANING

  Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.

  CALIBRATION

  The pH sensing bulbs become less sensitive over time so make sure that you are calibrating reguarly to keep your PRO pH meter accurate. Also, calibrate after cleaning or a long period of storage.

  • pH Range: 0.00 to 14.00 pH
  • pH Resolution: 0.01 pH
  • pH Accuracy: ±0.02 pH
  • Temperature Compensation: Manual, 0 to 50°C
  • Calibration: Manual, in 2 points through offset and slope trimmers
  • pH Electrode: SE220 with 3 foot cable (included)
  • Environment: 0 to 50°C / 32 to 122°F; max RH 95%
  • Battery Type: 1 x 9V (included)
  • Battery Life: Approx. 300 hours of continuous use
  • Dimensions: 5.7 x 3.1 x 1.6 inches
  • Weight: 7.8 ounces (with battery)

The PH-200 is a professional grade pH/Temp meter ideal for all pH testing water. With its advanced microprocessor it provides highly accurate dependable readings in such applications as hydroponics, purification applications, wastewater regulation, aquaculture, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, water treatment, wine, coffee, and agriculture.

Features:

• Waterproof housing (IP-67 rating)
• Digital automatic calibration (one point), with digital fine tuning
• Automatic Temperature Compensation (ATC)
• Auto-off function, data-hold function and low-battery indicator
• Easy-to-read LCD screen with simultaneous temperature display
• Replaceable Sensor (model SP-P2)
• Factory Calibrated: The PH-200 meter is three-point checked and factory calibrated to pH 7.0.
• Upgraded: Includes a translucent cap, 2 Triple A (AAA) batteries, lanyard, and pH 7.0 buffer (sachet)

pH meter measures the acidity or alkalinity of a substance. They are commonly used for water testing and biological sample analysis in hydroponics aquaculture and agriculture. A portable meter is commonly used to measure the pH of substances such as food beer or wine and is also used to test cleaning water rinse water and wastewater in lab industrial and food applications.

Supplied in an attractive plastic case along with standard solutions for easy calibration.

• Microprocessor-based fast reliable and accurate measurements.
• Replaceable Electrode Module
• Waterproof Impact resistant ABS Housing
• Large LCD display for reading convenience
• Easy Single Point Calibration
• Available in a portable pack.

The PH-80 has proven to be the MOST reliable pH meter in its price range. It has become a favorite in such applications as hydroponics & gardening, pools & spas, aquariums & reef tanks, water ionizers, drinking water and more.

Features:

• Measures pH and Temperature
• One-touch automatic digital calibration
• Water resistant
• Simultaneous temperature display
• Large LCD display
• Automatic Temperature Compensation (ATC)
• Auto-off function, data-hold function and low-battery indicator
• Factory Calibrated: The PH-80 meter is factory calibration to pH 7.0.
• Includes a translucent cap, batteries, storage solution and pH 7.0 buffer (powder)

• Resolution: 0.1 pH; Temperature resolution is 0.1 °C/F
• Accuracy: +/- 0.2 pH; Temperature accuracy is +/-2%
• Calibration: Digital automatic calibration (one point)
• Minimum EC/TDS: 10 µS/5 ppm
• Electrode: Glass sensor and reference tube electrodes
• Power source: 3 x 1.5V button cell batteries (model LR44 or equivalent; included)
• UPC: 891144000175

Our range of AMPPH - PENTYPE PH METER are economical range of easy to use and reliable hand held pen type meters. An important feature of the testers is the compact single chamber design. The meter gives accurate readings with its Built-in temperature sensor and can be easily calibrated. The meter is provided with an Auto Off function o enhance the battery life of the LR44 batteries. Also a hold function helps the user to Read and Record results with ease and convenience. These meters are cost effective and come encased in a protective case for safety and portability.

Supplied in an attractive plastic case along with standard solutions for easy calibration.

• SKU	HI98107
  Name	pHep Waterproof Pocket pH Tester with 0.1 pH Resolution – HI98107
  pH Range	0.0 to 14.0 pH
  pH Resolution	0.1 pH
  pH Accuracy	±0.1 pH
  pH Calibration	Automatic, one or two points
  pH Temperature Compensation	Automatic, 0 to 50 ℃ (32 to 122°F)
  Temperature Range	0 to 50 ℃ (32.0 to 122.0°F)
  Temperature Resolution	0.1 ℃ / 0.1 °F
  Temperature Accuracy	±0.5 ℃ / ±1.0 °F
  Automatic Shut-Off	8 minutes, 60 minutes, or disabled
  Battery Type/Life	CR2032 3V Li-Ion (1 pc.) / approximately 800 hours of use
  Environment	0 to 50°C (32 to 122°F); RH max 100%
  Dimensions	160 x 40 x 17 mm (6.3 x 1.6 x 0.7“)
  Weight	65 g (2.3 oz.) without battery

The Thermo Scientific™ Expert pH Pocket Tester is designed for on-the-go measurements of pH and temperature. The Expert pH Pocket Tester is best used in applications such as hydroponic gardening, aquaculture, agriculture, pools, cooling towers, and more!

• Large 4 digit double line display
• Simultaneous display of pH and temperature
• Battery life, ready, and calibration indicators
• Automatic temperature compensation
• Auto buffer recognition and calibration
• Multi language operational instructions

Display:

• Large 4 digit double line display and wide viewing angle make it easy to read and record measurements
• Battery life, ready, and calibration indicators
• Simultaneous display of pH with temperature

Keypad:

• Easy to operate and intuitive user interface with power, calibration, menu, and enter keys
• One push calibration: immerse sensor in calibration solution and press Cal
• Auto pH buffer recognition and calibration

Cap:

• Gasketed and leak proof with an O-ring seal
• Transparent cap with a fill line indicator
• Symmetrical cap can be front or rear facing
• Cap secures to the top of tester when not in use

Additional features:

• Lanyard provision enables the user to easily transport the pocket tester for on-the-go measurements
• Pocket tester floats and meets Waterproof IP67 rating
• Wide, stable base allows the tester to independently stand vertically for measurements
• Automatic temperature compensation: adjusts readings according to temperature change for greater accuracy
• Auto-off function: pocket tester turns off after 8.5 minutes of non-use to extend battery life
• CD/RoHS Marking
• Multi language instructions available

• From the market leader of testers comes the EcoTestr pH 1 & pH 2 – a new range of value-for-money, quality pH tester series designed for fuss-free pH measurements. Accurate, and easy to use, these testers are ideal for quick pH checks in hydroponic gardening, aquaculture, agriculture, pools, simple lab work and other water/wasterwater applications.
• 0.0 to 14.0 full pH range  
• Auto-calibration & auto-buffer recognition  
• IP67 waterproof – tester floats on water for easy retrieval  
• Long sensor life – no need to change sensors  
• Click-lock battery compartment requires no tools for battery replacements  
• Hold function freezes reading temporarily for ease of recording 
• Sensor protective cap that doubles up as a container for samples or calibration solution
• pHResolution 0.1 
• pHAccuracy ±0.1 pH
• pH Calibration Points 1 (Auto)Operating 
• Temperature 0 to 50°C
• Memory Yes
• Hold Function Yes
• Auto-Off 8.5 mins after last key pressed
• LCD Display3 ½ digit with annunciator
• Power 4 X 1.5 V "A76" Micro alkaline batteries
• Ingress Rating IP67 Waterproof
• Dimensions; WeightBoxed: 24.5 cm x 13.5 cm x 4.5 cm; 137 g

The Milwaukee Waterproof pH54 Tester is one of our most accurate low cost, rugged and reliable pH testers in the market featuring the ability to easily replace the probe providing for years of carefree use. It's simple 2 point manual calibration is simple-to-use. Ideal for use in aquariums, hydroponics, horticulture, education and many other applications.

The Milwaukee Waterproof pH54 pH tester offers:

The Waterproof pH54 tester is accurate to ±0.1 pH and is easy to read.

With easy 2 point manual calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters.  Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results.

The tester comes with a replaceable pH probe with a double junction probe designed for longer life.

pH Range: 0.00 to 14.00 pH

pH Resolution: 0.01 pH

pH Accuracy: ±0.1 pH

Typical EMC Deviation: ±0.1

Calibration: Manual, 1 or 2 points

Probe: Replaceable double junction for extended life (MA73600)

Environment: 0 to 50°C / 32 to 122°F; max RH 100%

Battery Type: 3 x 1.5V; IEC LR44, A76 (included)

The Milwaukee Waterproof pH55 PRO pH/Temp. Tester is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select.  Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications.

The Milwaukee Waterproof pH55 pH/temp. tester offers:

The Waterproof pH55 PRO tester is accurate to ±0.1 pH & ±0.5°C (+/-1°F) and is easy to read.

With easy 2 point automatic calibration, this pH tester is quickly calibrated to an accuracy of much more expensive meters.  Simple design and rugged, it brings great value for any application. Why guess at your readings using litmus paper when you can have guaranteed accurate, digital LCD results.

The tester comes with a replaceable pH probe with a double junction probe designed for longer life.

pH Range: -2.0 to 16.0 pH

Temperature Range: -5.0 to 60.0 °C (23 to 140 °F)

pH Resolution: 0.1 pH

pH Accuracy: ±0.1 pH

Temperature Accuracy: ±0.5 °C (±1 °F)

Typical EMC Deviation: ±0.1

Typical EMC Temperature Deviation: ±0.3 °C (±0.6 °F)

Temperature Compensation: Automatic from -5 to 60 °C (23 to 140 °F)

Calibration Automatic: 1 or 2 points with 2 sets of pre-memorized buffers (pH 4.01, 7.01, 10.01) or (pH 4.01, 6.86, 9.18)

Probe: Replaceable double junction for extended life (Mi56P)

• Features
  • Slim, ergonomic design that fits comfortably in the hand or pocket
  • Automatic Temperature Compensation (ATC), displays temperature in ℃ or ℉
  • Automatic calibration when using standard buffers (pH 4.01, 7.01 and 10.01)
  • Simultaneously displays pH and temperature measurements
  • Automatic shut-off with three user controlled settings
  • Battery % level at startup