Shiv Shakti Chemicals

• Fast easy to read results with large digital LCD readout
• Extreme accuracy to ±0.02 pH and extended range (-2.00 pH to 16.00 pH)
• Lightweight and portable
• Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
• Simple push button, automatic two-point calibration for increased accuracy
• Food grade electrode with a rugged, easy-to-clean, PVDF body, a conical tip for use with semi solids with a screw on cap to ensure proper storage
• Rugged stainless temperature probe
• 3 feet probe cables for extra flexibility when testing
• Auto shut off and low power demand with approx. 300 hours of continuous use (battery included)

pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH electrode will no longer function.

You can extend the life of your pH electrode in the following ways.

All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use!

The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.

The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.

The pH sensing bulbs become less sensitive over time so make sure that you are calibrating regularly to keep your PRO Plus pH meter accurate. Also, calibrate after cleaning or a long period of storage.

• pH Range: 0.00 to 14.00 pH
• Temp Range: 23 to 104°F
• pH Accuracy ±0.02 pH
• pH Resolution: 0.01 pH
• Temp Resolution 0.1°C
• Temp Accuracy (@25°C): ±0.5°C
• Temperature Compensation: Automatic, 0 to 70°C
• Calibration: Automatic, 1 or 2 points
• pH Electrode: MA920B/1 (included)
• Temperature: Probe MA831R (included)
• Environment: 0 to 50°C / 32 to 122°F; max RH 95%
• Battery Type: 1 x 9V (included)
• Battery Life: Approx. 300 hours of continuous use
• Auto-off: After 8 minutes of non-use
• Approximate dimensions: 5.7 x 3.1 x 1.6 inches

• DESIGN FEATURES
  • Fast easy to read results with large digital LCD readout.
  • Accurate to ±0.02 pH with a 0.00-14.00 pH range.
  • Lightweight and portable.
  • Easy measurement: just place the probe in the sample, gently stir and wait for the reading to stabilize
  • Simple manual two-point calibration for increased accuracy.
  • Gel-filled, double junction lab grade pH electrode for low maintenance and high performance with a screw on cap to ensure proper storage (SE220 probe included).
  • 3 feet probe cables for extra flexibility when testing.
  • Auto shut off and low power demand for approx. 300 hours of continuous use. (battery included)
  USE AND CARE 

  pH meters usually start performing poorly because of problems with the probe. The two parts of the pH probe that cause problems are the glass sensing bulb and the reference junction.

  SENSING BULB

  The glass bulb loses sensitivity with use and will eventually fail. This is true of all pH probes.

  REFERENCE JUNCTION

  The reference junction is a small hole that allows the meter to compare the sample to a reference. The reading is generated based on the electrical difference between the sample and reference. If the junction hole gets clogged, the pH probe will no longer function.

  You can extend the life of your pH electrode in the following ways.

  CLEANING AND STORAGE

  All pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time!  This will be needed to help clean and condition the pH electrode before use!

  STORAGE

  The pH probe needs to be kept hydrated. Long periods of dry storage will damage the sensitivity of the probe. Allowing the probe to dry out may also result in the junction hole getting clogged.

  Storing in pH probe storage solution MA9015 or pH calibration buffers will help address both these issues. Do not store in tap water and DI water. This will damage the sensitivity of the probe.

  The best way to store the probe is with the probe's cap filled with storage solution or calibration buffer and the cap tightened to prevent leakage. It is also recommended that to store the electrode upright to further reduce the potential for leakage.

  CLEANING

  Residue from the sample can impact the sensitivity of the sensing bulb and clog the junction. This is especially true if the sample has a lot of organic material. We recommend regularly soaking your electrode in cleaning solution MA9016.

  CALIBRATION

  The pH sensing bulbs become less sensitive over time so make sure that you are calibrating reguarly to keep your PRO pH meter accurate. Also, calibrate after cleaning or a long period of storage.

  • pH Range: 0.00 to 14.00 pH
  • pH Resolution: 0.01 pH
  • pH Accuracy: ±0.02 pH
  • Temperature Compensation: Manual, 0 to 50°C
  • Calibration: Manual, in 2 points through offset and slope trimmers
  • pH Electrode: SE220 with 3 foot cable (included)
  • Environment: 0 to 50°C / 32 to 122°F; max RH 95%
  • Battery Type: 1 x 9V (included)
  • Battery Life: Approx. 300 hours of continuous use
  • Dimensions: 5.7 x 3.1 x 1.6 inches
  • Weight: 7.8 ounces (with battery)

• The Milwaukee MA871 Digital Brix Refractometer delivers precise, reliable, and fast Brix measurements, making it the ideal tool for food, beverage, and agricultural applications. Whether you're a brewer, winemaker, maple syrup producer, or food quality professional, this digital refractometer ensures quick, accurate readings with minimal sample size.

With an easy-to-use design and automatic temperature compensation (ATC) the MA871 provides professional-grade results without the need for manual calculations or optical guesswork. Say goodbye to outdated refractometers and experience the speed, precision, and convenience of digital Brix testing.

·       Brewers – Easily measure wort sugar levels to determine potential alcohol content and track fermentation progress.

·       Winemakers – Accurately determine grape ripeness and predict alcohol content.

·       Cider & Mead Makers – Ensure balanced sugar levels for fermentation success.

How to Use:

1. Calibrate with distilled water.
2. Place 2-3 drops of sample in the well.
3. Close the cover and read the digital display.

High Accuracy – 0 to 85% Brix range with ±0.2% precision.
Fast & Reliable – Get results in under 2 seconds.
Easy to Use – Simple two-button operation for hassle-free testing.
Minimal Sample Needed – Only 2-3 drops required for measurement.
Automatic Temperature Compensation (ATC) – Ensures consistent accuracy.
Long Battery Life – Battery indicator & automatic shut-off included.
Versatile Applications – Ideal for brewing, winemaking, food processing, and agriculture.

• DIGITAL. SIMPLE. COMPACT.The Milwaukee T75 Waterproof Total Dissolved Solids (TDS) Pen is designed for, aquariums, aquaculture, education, water conditioning and many other applications. The T75 helps you make sure that your fish have the right TDS balance to help them stay healthy. TDS also help keep filters up-to-date and clean for water filtration. Keep TDS in your target range to help your achieve better results.DESIGN FEATURES
  • Measures Total Disolved (TDS) direct and with automatic temperature compensation.
  • Easy-to-read LCD.
  • Ideal range for aquariums (0 to 1999 ppm).
  • Units in ppm easily convertable to uS/cm.
  • Factory calibrated with the ability to recalibrate if needed.
  • 250 hours continuous use (3 x 1.5V batteries included).
  • Simple one point calibration.
  • Fully waterproof to IP65
  • Replaceable TDS electrode MA73075.
  CARE AND USEMAINTENANCETDS/PPM electrodes can develop nutrient build up over time. To miminize build up, always rinse the probe in fresh tap or DI water after every use.CONVERTING TDS TO ECThe Milwaukee TDS Pen, like all TDS meters, provides a measure of Total Dissolved Solids (ppm) reading, of contaminates per unit of volume in a solution.