Shiv Shakti Chemicals

The PACKTEST is the simplest water quality test device.

This product allows easy measurement of ionic Silver(Ag ⁺ ) in test water.

• Measuring Method	Dimethylglyoxime Visual Colorimetric Method
  Indicator	0.5, 1, 2, 5, 10 mg/L
  Measuring Time	2 min.
  Use for Seawater	OK
  Package Size	165L x 110W x 65H mm
  Package Weight	approx. 140 g

• Small size polyethylene tube for great portability.
• Test preparation is virtually eliminated: Pre-mixed reagent for each test is already packed inside the tube.
• Fewer operation step makes it easier to use and reduce potential errors.
• Eliminate the time to create calibration curve for measurement.
• Very simple steps: 1) Take sample into the tube. 2) Wait for reaction time. 3) Compare color. 4) Get the result.
• Some items require additional step

The Kyoritsu WAK-Al Water Testing Kit enables easy detection of aluminum ions (Al³⁺) in water samples using a visual colorimetric method, suitable for drinking water inspection and quality control applications.

Applications

• Process management
• Research

• Small size polyethylene tube for great portability.
• Test preparation is virtually eliminated: Pre-mixed reagent for each test is already packed inside the tube.
• Fewer operation step makes it easier to use and reduce potential errors.
• Eliminate the time to create calibration curve for measurement.
• Very simple steps: 1) Take sample into the tube. 2) Wait for reaction time. 3) Compare color. 4) Get the result.
• Some items require additional step

The Kyoritsu WAK-NaClO2 Water Testing Kit enables measurement of sodium chlorite concentrations in water samples using a visual colorimetric method, suitable for process management and quality control.

Applications

• Residual level check
• Process Management

The PACKTEST is the simplest water quality test device.

This product can measure ^the amount of magnesium Magnesium(Mg ²⁺ ) in test water.
The standard colors included have Magnesium ions on the top row and Magnesium Hardness on the bottom row. You can use them according to the purpose of your measurement.

The PACKTEST is the simplest water quality test device.

This product allows for easy visual measurement of Sulfate ions (SO ₄ ^2- ) in test water.
It is useful for managing the circulating fluid in biological desulfurization equipment, managing boiler water to prevent piping corrosion, and measuring hot spring water.

remarks

Before drawing the sample water into the tube, you need to perform an operation using the included K-1 and K-2 reagents.

• PACKTEST  is a "Simplified Water Analysis Tool" by  KYORITSU CHEMICAL-CHECK Lab.,Corp , JAPAN. This product allows to measure Hydrogen Peroxide concentration in different types of sample and application in

  Measuring Method	Potassium Iodide Visual Colorimetric Method
  Indicator	3, 7, 13, 20, 35, 70, 100, 130, 200, 400, 700 mg/L
  Measuring Time	20 sec.
  Use for Seawater	OK
  Package Size	165L x 110W x 65H mm
  Package Weight	approx. 140 g

The PACKTEST is the simplest water quality test device.

This product can easily measure the Total Chromium(trivalent Chromium+ hexavalent Chromium) in various test water, including industrial wastewater.

remarks

Before drawing the test water into the tube, you will need to perform an operation using the included K-1 and K-2 reagents.

Compatible with SMARTPACKTEST(Measuring Range 0.5 to 20 mg/L).

• Key Features
  • Small size polyethylene tube for great portability.
  • Test preparation is virtually eliminated: Pre-mixed reagent for each test is already packed inside the tube.
  • Fewer operation step makes it easier to use and reduce potential errors.
  • Eliminate the time to create calibration curve for measurement.
  • Very simple steps: 1) Take sample into the tube. 2) Wait for reaction time. 3) Compare color. 4) Get the result.
  • Some items require additional step
  Product Description

  The Kyoritsu WAK-Mg-2 Water Testing Kit allows for easy measurement of magnesium ion concentrations and magnesium hardness in water samples. It's suitable for drinking water inspection, environmental research, and fish farming applications.

  Applications

  • Drinking water check
  • Agricultural management

   

This product allows to measure trace amount of Lead using concentration, and separation from other metal ions. Please read this precautionary statement carefully before use.

• If the apparatuses are contaminated with Lead or other metals, it will cause the faulse reading. Please be sure to wash the apparatuses thoroughly with pure water prior to use.
• If pipette and syringe are contaminated, they will cause the liquid reagent to be also contaminated.
• If the possibility of Lead contamination is concerned, transfer the liquid reagent to small beaker, then use the pipette and syringe to prevent contamination.
• Components of perspiration may cause the wrong reading too. Please wash your hands thoroughly before using this product. The contamination of K-4 Reagent and/or eluate will affect the reading.

• • When the sample including some metals, they should be dissolved with K-1 Reagent (diluted Nitrate). However, if you can still confirm the precipitation even after using the K-1 Reagent, you may need to take additional process: boil the sample after adding K-1 Reagent or filter the sample to remove them.

• • • Not all kinds of samples are measurable with this product. We suggest to cross check on correlation between the result from this product and reference laboratory using the same sample.

The PACKTEST is the simplest water quality test device.

This product can easily measure free Cyanide(Cyanide ion) and cyanogen Cyanide in various test samples, including industrial wastewater and environmental water.

remarks

Before drawing the test water into the tube, you will need to perform an operation using the included K-1 reagent.

Compatible with Smart Pack Test (measurement range 0.02 to 0.5 mg/L).

The PACKTEST is the simplest water quality test device.

This product is a screening kit that can easily measure the concentration of animal and vegetable fats in test water by PACKTEST. Please use the measurement results as an alternative indicator of normal hexane extractable substances (content of animal and vegetable fats and oils).

remarks

Compatible with SMARTPACKTEST(Measuring Range 10 to 50mg/L).

The PACKTEST is the simplest water quality test device.

This product uses an enzymatic method to easily measure Glucose(grape sugar) in various test samples, such as those used in the brewing industry.

remarks

Compatible with SMARTPACKTEST(Measuring Range 0 to 10 mg/L)

• Small size polyethylene tube for great portability.
• Test preparation is virtually eliminated: Pre-mixed reagent for each test is already packed inside the tube.
• Fewer operation step makes it easier to use and reduce potential errors.
• Eliminate the time to create calibration curve for measurement.
• Very simple steps: 1) Take sample into the tube. 2) Wait for reaction time. 3) Compare color. 4) Get the result.
• Some items require additional step

The Kyoritsu WAK-Cblt Water Testing Kit enables detection of cobalt concentrations in various water samples using a visual colorimetric method, ideal for process management and quality control.

Applications

• Process management

• Key Features
  • Small size polyethylene tube for great portability.
  • Test preparation is virtually eliminated: Pre-mixed reagent for each test is already packed inside the tube.
  • Fewer operation step makes it easier to use and reduce potential errors.
  • Eliminate the time to create calibration curve for measurement.
  • Very simple steps: 1) Take sample into the tube. 2) Wait for reaction time. 3) Compare color. 4) Get the result.
  • Some items require additional step
  Product Description

  The Kyoritsu WAK-Pd Water Testing Kit facilitates measurement of palladium ion concentrations in water samples, including industrial wastewater. It employs a potassium iodide colorimetric method for precise analysis.

  Applications

  • Process management

   

• This product uses the potassium permanganate oxidation method to provide an immediate visual colorimetric estimate of the approximate BOD (biochemical oxygen demand).
• Use it for wastewater management, screening tests, and estimation of dilution ratio when measuring BOD by official methods.
• * Values obtained by this method are estimates of BOD. Be sure to check the correlation with the official method before using.

• Measurements: BOD
• Number of measurements: 50
• Simple water quality testing equipment
• Measurement principle: Estimation of BOD value by potassium permanganate colorimetry
• Scale of measurement: 0, 20, 40, 60, 100, 200, 300, 500 or more mg/L
• Measurement time: Just after 2 minutes (10 ~ 30 degrees Celsius)
• Contents: 50 tubes (10 laminated bags containing 5 tubes), 1 storage bag, 1 standard color (in a case), 1 usage sheet